The FAA has approved installation of all Turbo oxygen makers in all Part 23 aircraft as a minor alteration. Any A&P can install the system, without inspection authorization, using merely a logbook entry. The installation is simple requiring only power and ground at 80W and some plumbing connections.
A single device for cabin and environmental sensing, health monitoring ,oxygen system control and monitoring, and an array of RS-232, voltage, and Air ATD outputs. Dedicated hardwired connections for reliable continuous readings.
Use code HVIII and FREESHIP through January 2026 for a 22.5% discount and free continental UPS ground.
We have added support for the Illyrian pulse oximeter to the Aithre Shield EX 3.0. This means that the EX 3.0 now wirelessly collects both oxygen levels of the pilot AND portable oxygen tank pressure and puts both on the avionics with CO ppm data. The EX 3.0 is fully compatible now with Dynon Skyview (SV-EMS required) and with Garmin G3x (GEA 24 required). Wiring is simple and easy and the EX 3.0 weighs only 1 ounce and is just 1.75"x1.75"x0.7" in size.
The Mosaic LSA Facebook group is the place to be to keep up with the new airframes, engines, and technologies, and be one of the exciting people who make this community.