Aithre Shield EX 1.0 Behind-the-Panel Carbon Monoxide Detector - Black
**All products currently are only available at EAA AirVenture or through our retailers. Visit us at the Innovation Showcase at Oshkosh**
The EX 1.0 is being retired. There are ONLY 6 REMAINING, so order yours today!
Experimental Aircraft Only: The Aithre Shield EX 1.0 is the first behind-the-panel mounted carbon monoxide detector that puts CO readings directly on your Dynon SkyView, Garmin G3X and Advanced Flight Avionics. Features include simple 3 wire installation, a micro-footprint, and 10 years with no recalibration.
SIMPLE INSTALLATION: Just three wires - 5V power, ground, and analog output (requires GEA 24 for Garmin and either SV-EMS or AF-EMS for Dynon or Advanced) - Installation Instructions
SENSITIVE: Under 30 second sensor response between 0 - 255 ppm with 1 ppm resolution
COMPACT: Measures just 1.97" x 1.97" x 0.64" (mounting flange adds 0.75" to the base width) and weighs only 1.1 ounces
INTUITIVE GRAPHICAL INDICATION: This device is compatible with Garmin G3X, Dynon Skyview and Advanced Flight Systems and outputs as a moving bar (G3X) or a graphical dial (Dynon) or readout with popup notificatication (Advanced) (requires GEA 24 for Garmin and either SV-EMS or AF-EMS for Dynon or Advanced)
TEMPERATURE INDEPENDENT: Internal temperature adjustment circuit that compensates for temperature induced errors in the sensor between -10 C to +50 C
NO RECALIBRATION: State-of-the-art sensor requires NO recalibration for up to 10 years under normal operating conditions
PRESSURE & ALTITUDE INDEPENDENT: The detector is not affected by pressure and altitude changes
HAND-CALIBRATED: Every Aithre detector is individually calibrated using high precision calibration CO gas and comes with a signed certificate of calibration
6000 MSL DESIGNED AND ASSEMBLED: Ketchum, Idaho
**The EX 1.0 is NOT compatible with the Aithre Connect iOS application**