Aithre Altus - Portable Oxygen Tank Monitor for iOS
The Altus is the first of its kind. It converts your portable oxygen tank into a smart device, by allowing wireless monitoring of oxygen PSI, flow rate, pressure altitude, FAA oxygen levels and provides oxygen use reminders, low level alerts, and shutoff reminders on landing. All of this is provided via your iOS device with Siri to your headset (when your headset is paired to your iOS device).
Installation is simple and takes around 15 minutes - Installation Instructions. Simply insert our high pressure tee fitting between your tank and existing pressure gauge and strap the housing on using the provided Velcro. Note for larger or wide tanks, you may need a separate extension M-F fitting that Aithre can separately provide. The Altus auto pairs to your iOS using BLE.
SENSITIVE: Detects pressure changes with a resolution of 10psi
RESPONSIVE: Updated pressure readings are sampled every 6 seconds
FLOW RATE AND TIME: Ongoing calculations of oxygen flow rate and time remaining
ON-BOARD PRESSURE ALTIMETER: Pressure altitude provided to determine the apparent altitude for oxygen use
FAA OXYGEN LEVELS: Reminders when you cross FAA levels that require oxygen (pilot, passenger levels)
CUSTOM OXYGEN LEVELS: Set your own personal pressure altitude to trigger reminders
LOW OXYGEN WARNING: Warning provided when you drop below 500psi
iOS: Aithre Connect App integrated, providing discrete and 15 minute history trend data plus popup and Siri notifications to your headset (when paired to your iOS device) when threshold pressure levels are crossed
AA POWER: Long battery life with 4 AA batteries that is monitored via the iOS app
COMPLETE PACKAGE: Altus includes a Velcro band, high pressure quick-disconnect sensor, and high pressure-rated tee fitting - large or wide tanks may require a separate M-F extension that can be separately purchased to allow the tee fitting to clear the tank during installation
AITHRE SHIELD COMPATIBLE: Manage your carbon monoxide levels on the same iOS app when using either the Aithre Shield 4.0 or the Aithre Shield EX 2.0 or 3.0 CO detectors
AVIONICS INTEGRATED: Use with the Aithre Shield EX 3.0 to put your O2 psi directly on your Dynon, Garming G3x, MGL, and Advanced Flight Avionics